#BLOG
Medical mind of Roberto Molinari
Designing a new smile - part.2
IT - continuazione dal precedente post
Osservando il profilo della paziente si può notare come overjet e overbite siano oggettivamente non accettabili dal punto di vista estetico.
L’ortopantomografia oltre che ad una oggettiva infraocclusione dell’impianto posizionato in area 2.2 mostra lesioni periapicali a carico dei denti 1.2,...
More
Designing a new smile
IT - In un caso complesso estetico come questo che vi sto mostrando, il Digital Smile Design può rappresentare un metodo di studio e di progettazione del nuovo sorriso predicibile e obbiettivo?
Di certo vi posso dire che sicuramente in un caso di questo tipo in cui i denti frontali sono protrusi e la discrepanza tra la linea m...
More
Finishing line
IT - Un attacco periodontale sano è fondamentale per l'estetica, la funzionalità ed il comfort.
L'interazione tra il margine protesico e l'attacco periodontale è condizionata da tre variabili: la posizione dei margini del restauro, il contorno del dispositivo protesico e la risposta dei tessuti gengivali alle procedure di preparazione...
More
Estetica del sorriso
IT - Nei casi complessi in cui è coinvolta l'estetica, al fine di pre-visualizzare il risultato finale, eseguo sempre lo studio dell'estetica del sorriso, per capire quale potrebbe essere l'impatto dei denti modificati sul volto del paziente.
A tal fine creo il mock-up direttamente nella bocca del paziente.
È chiaro che per essere il ...
More
The starting point: functionalize the dentures
IT - La progettazione implanto protesica di un caso complesso totalmente edentulo deve sempre partire dalla funzionalizzazione della protesi mobile individuando la corretta dimensione verticale e la corretta funzione e fonetica. Questo punto di partenza è essenziale in quanto ci consentirà, seguendo il concetto della “doppia scansione...
More
One day dentistry & Surgery: more than a theoretical concept
IT - One Day Dentistry & Surgery è più di un concetto teorico è una filosofia di lavoro che mi consente in un unica seduta di ottimizzare il flusso di lavoro.
In un caso come quello che vi sto descrivendo in cui l’estetica è coinvolta, al fine di ottenere un buon risultato estetico finale, dovrà essere curata la fase chirurgic...
More
Pterygo-maxillary implants: clinical indications
IT - Il protocollo operativo da seguire nell'installazione degli impianti pterigo-mascellari è stato messo a punto per evitare nelle grandi riabilitazioni il grande rialzo di seno mascellare.
Questo è molto importante specialmente per quei pazienti anziani totalmente edentuli con diabete o osteoporosi, in quanto l’intervento sare...
More
Rubber DAM and digital scanning
IT - Relativamente agli Inlay e Onlay che rappresentano sicuramente una delle indicazioni facilmente realizzabili con la tecnologia Cerec, vorrei mostrarvi esattamente il protocollo operativo che utilizzo nella mia pratica quotidiana, dalla scansione alla cementazione in una singola seduta.
Il protocollo di lavoro prevede degli step ben ...
More
Managing an implant case in the esthetic area digitally
EN - When I manage implant cases in the front areas with digital methods, in order to obtain a symmetrical position of the gums, I always position the temporary teeth immediately screwed on their own implant and I create a “Gingival mask” with the software.
In the case that I’m showing, the patient is a gummy smile.
The ...
More
Digital dentistry applying "Interdental Mini Wings" concept
IT - Nei casi in cui la papilla inter prossimale è collassata perché il paziente ha perso l’osso interprossimale, al fine di gestirla correttamente modellandola, si dovrebbero condizionare i tessuti molli con i denti di ceramica.
Seguendo il concetto di "Interdental Mini Wings" mostrato da Magne nel 1999 (MAGNE P., MAGNE M., ...
More
One Day Dentistry: cementing ceramic tooth with T-base
IT - Operando in “One Day Dentistry” applicato all’implantologia, dopo avere copiato con lo scanner la posizione dello Scan-body posizionato sul T-base al fine di rilevare la posizione spaziale dell’impianto, dopo avere progettato la corona protesica e dopo averla fresata con il molatore la domanda che ci poniamo è come sol...
More
Materials: why WE MUST know them
IT - Talvolta in situazioni particolari, quali ad esempio i casi di pazienti che hanno para funzioni e serrano i denti, non è consigliabile utilizzare materiali quali la zirconia con una elevata durezza alla compressione, ma al contrario sarebbe indicato un materiale meno duro ma con un modulo di elasticità basso in grado di assorbire...
More
Computer-guided surgery: 4 advantages allow you to obtain a predictable outcome
IT - La chirurgia guidata computerizzata fornisce fondamentalmente quattro vantaggi:
consente di eseguire una chirurgia flap-less mirata con minor trauma per il paziente in fase operatoria;
consente di posizionare gli impianti “protesicamente guidati” evitando, quindi emergenze vestibolari o cantilever troppo estesi.
consente di ...
More
Preparing the frontal teeth step by step
IT - In questo video mostro come preparo i denti frontali step by step, prima di prendere l'impronta digitale con lo scanner. Il concetto più importante da sapere è che inizio sempre a preparare i denti partendo dalle superfici vestibolari del mock-up per due motivi.
Primo per salvare lo smalto: questo è direttamente collegato alla ...
More
Photo tricks: how to emotionally involved your patient
IT - Ti racconto alcuni dei trucchi utili per scattare buone foto in grado di coinvolgere emotivamente il paziente.
La cosa più importante da fare durante le riprese fotografiche, è posizionare correttamente il paziente in relazione alle luci, perché la qualità della foto è direttamente correlata alla luce.
A questo proposito qua...
More
Toronto Bridge’s new material: When the choice is not only an aesthetic evaluation.
EN - In the complex cases in which the aesthetic is involved, independent of the clinical problems that the patient show, we must always start from the aesthetic evaluation of the case, and only then we will create a personalized treatment plan.
It must be also clear that the choice of materials with which the prosthesis will be created,...
More
Predictible cases
EN - In digital dentistry to obtain an accurate and predictable result from the aesthetic point of view it is necessary to perform an accurate preparation without imperfections, possibly with the microscope, a complete and precise scan copying all the details of the prepared teeth and not, and automatically the prosthetic devi...
More
Zirconia
EN - Zirconia is a material today in vogue for its hardness and resistance.
I believe, however, that the choice to use this material in the front areas as monolithic crowns is a risky choice if we consider its optical features.
In fact, the zirconia not infiltrated with glass-ceramic has a very high value and is not translucent, and it ...
More
One Day Dentistry & Surgery
EN - "One-day dentistry and surgery" it means to finalize the case in only one time. for example, in this case, I had to balance the parables gums of both central incisors, and I had to restore the esthetic of both central incisors only as requested from the patient.
So I created the direct mock by the composite (step 2).
Before prepa...
More
Proper geometry - starting from the Mock-up
During preparation step, we have to prepare the teeth with a proper geometry and starting from the Mock-up.
This is important if we consider that preserve enamel helps us to obtain a more stable system after cementation. In fact, bonding between enamel and the prosthetic devices made in ceramic are stronger than the bonding between denti...
More
Omnicam to Bluecam evaluating
Recently, I have read this scientific article about digital scanning.
More precisely this study compaired Omnicam to Bluecam evaluating the final precision of the prosthetic teeth after their milling. The conclusions fundamental were fundamental two:
1. Crowns fabricated with the Omnicam scanner system had significantly higher vertical ...
More
The most important thing to do is the mock-up
In the complex cases in which esthetic is involved the most important thing to do is the mock-up.
It’s clear that to be as true to the information as possible, with respect to the final result, the mock-up has to be perfect.
In addition to the resin that I use to make the teeth, I use a pink composite to redefine the gingival profile ...
More
The real need of change
EN - In front of a patient dissatisfied of his smile, who asks us to restore his own aesthetics, what should we answer?
Should we try to convince him to desist from undergoing invasive treatment, proposing only orthodontic therapy and obtaining only a minimal alignment of the frontal area?
Prepare the teeth in these cases managing the p...
More
Ricostruzioni estetiche complesse: metodi digitali e protocolli operativi integrati
Autori: Roberto Molinari, Mauro Fazioni, Franco Rossini
lntroduzione
La ricostruzione estetica del sorriso rappresenta oggi un argomento di studio molto di tendenza.
Le difficoltà che il clinico deve affrontare, sono fondamentalmente legate alla necessità di pre-visualizzare il risultato finale non solo dal punto di vista estetico ma...
More
BILBAO - VII Simposio Digital CEREC e inLab
EN - Next 1-2 of February I will be in Bilbao At the VII edition of the Nazional Congress of Digital Dentistry organized by SOCE Sociedad Espanola de Odontologia Digital.
I am very excited to go to Spain. I will take a conference at the main conference room and then a workshop.
During the first presentation, I will show two cases about ...
More
Dentsply Sirona - Tel Aviv - Israel 2018
IT -
Il 13 dicembre, durante la mia presentazione a Tel Aviv - Israele, ho mostrato il mio protocollo di lavoro in odontoiatria estetica digitale, seguendo due diversi processi: "Chairside" e “Labside”.
Seguendo il protocollo "Chair-side", sono in grado di finalizzare il caso in un solo giorno o in pochi giorni.
In questo c...
More
Corso Photo & Emotions - 28 Settembre 2018
Estratto dal corso Photos & Emotions del 28 settembre 2018.
Durante la parte pratica del corso tutti i partecipanti hanno eseguito tutti gli scatti previsti nel programma: foto del viso, foto intraorali, foto dei manufatti protesici.
Per maggiori informazioni sul corso: Photo & Emotions...
More
Palermo - dental conference
IT - Sicilia: terra di eroi e crocevia di tante culture che hanno lasciato la loro eredità storica.
Passare in taxi davanti al monumento a memoria per la strage di Capaci ha creato in me un senso di rispetto assoluto verso quella terra cosi martoriata ma allo stesso tempo piena di orgoglio.
In questa cornice emozionale si è svol...
More
Bologna - ICDE ITALIA
IT - Durante il corso del 29 e 30 Giugno che si è tenuto a Casalecchio di Reno (BO) presso la sede corsi ICDE di Ivoclar, ho incontrato dei colleghi “Digital”.
Il tema dell’incontro: odontoiatria estetica digitale chair-side. Nella prima giornata di lavoro ho mostrato 4 casi in cui l’aspetto estetico era compromesso ma risolti c...
More
International conferences and congress - Dubai
On 5th of May during my second presentation in Dubai, I showed my protocol of work in digital esthetic dentistry but following a different process compared the process that I showed the day before.
With this “Chair-side” process, I’m able to finalize the case in only one day or sometimes in a few days. In this case, I use the mock-...
More
Conference in Prato - Italy
EN - Conference organized by ANDI Prato, in which Me and dr. Margutti showed to our colleagues simple and complex cases.
Modern dentistry is moving ever faster towards digital and the use of integrated software allows us to manage different matters, from prosthodontics to implantology, from orthodontic to radiology, obtaining results...
More
Digital Process - Rome 2017
EN - During the Rome's conference, I showed three clinical cases.
In the first case I showed how I manage the front areas where implants must be insert following a chair-side work process.
In particular, I stressed the importance of a correct initial surgical step by which it will be possible to keep gingival parabolas and papillae ...
More
Colloquium Dental 2017
EN - Colloquium Dental is probably the biggest event ever organized in Italy in fact always draws almost 3000 people between dentists and dental technicians.
It is in fact, an international cultural showcase where experts in the dental industry are confronted on different themes.
In particular, the subject of the 2017s edition was l...
More
21st international congress of Estethic Dentistry - Instanbul
EN - It was an honor for me to participate as a speaker at the 21st edition of the congress organized by the young Turkish Academy of aesthetic dentistry EDAD.
In Istanbul, this scientific movement organized an unexceptionable congress from a cultural and also organizational point of view, attracting more than 800 colleagues from all...
More
Conference in Merano - Italy
EN - I have shown, together with Franco Rossini dental technician with which I am collaborating in the management of complex prosthetic cases in which aesthetic is involved, digitizing all the work process.
More precisely, we have shown a patient who showed both functional and aesthetic problems.
I have explained how I manage the de...
More
Les rencontres CEREC Touch - Marseille
EN - It has been a great pleasure to be in Marseille with the French colleagues.
The location and the view was amazing.
During my presentation at the congress I have shown My process of work following two different way Chair-side and Lab-side.
IT - È stato un grande piacere essere a Marsiglia con i colleghi francesi.
La location ...
More
Master course and workshop - Cologne - Germany - 2017
EN - During the Cologne Congress, in the first day of conferences, I made two Master course during which in the Part one I gave the theoretical background and the philosophy behind the concept for the ultimate challenge to create prosthetic teeth that look like natural teeth".
I also showed case presentations, material selection and ...
More
CEREC - Inlab - IV Simposio Digital - Málaga
EN - At the Cerec Users congress, I had the honor to meet Prof. Mörmann that together Dr. Brandestini in 1986 they created the first CEREC prototype.
From that moment, digital development started in dentistry.
IT - Al congresso Cerec Users ho avuto l’onore di conoscere il Prof. Mörmann che insieme a Brandestini nel 1986 crearono...
More
Innovation Summit 2016 - Italy
EN - the Italian Cerec Users congress it set in an exciting historical place.
The conference topic: vision in digital dentistry.
On the previous day, I showed to the participants how managing the prosthetic devices after their milling, in particular showing the polishing technique, staining technique, and cut-back technique.
The ...
More
Doctor R. Molinari obtained his diploma as a dental technician in 1986; subsequently he obtained his degree in dentistry and dental prosthetics with honors from the University of Bologna (Italy) in 1993.
After having trained with the most notable experts in modern dentistry, he specialized in periodontology, implantology and aesthetic prosthetics.
He holds courses for odontologists on the correct use of CAD/CAM techniques on natural teeth and implants.
He lives in Mantova (Italy) where he has his own dental practice.